4x4 Fence Post Light Kit Includes:
- Fence post cap to replace your existing cap
- 3.5” x 3.5” reducer piece (for use with WOOD fence posts) **
- Clear dome that twist-locks into place for year-round use
- 9-LED puck light kits, with all wiring
- 10’ extension cables to run to the next post in the fence
How to Install the Fence Post Light Kit:
Wire can be run through vinyl fence horizontal beams, which are generally hollow in most cases. Our preferred method is to use magnets (readily available at most big box stores) and any kind of pull string and then tie the string to the end of the extension cable. There are several methods you can use to get the wire through your fence. If you choose to run the wire outside / behind your fence, each of our fence caps has a small thin notch that can easily be cut out so the wire can be run externally.
4x4 caps fit posts 4.00" to 4.25"
If post is slightly smaller, you can pad it out easily with weather-striping or a small set screw will work just fine
NOTE: ** If you are going to use these with wood posts, leave the plastic insert inside the larger white cap. If you plan to use these with 4” vinyl posts, simply remove the insert and discard.
All fence caps and domes are 3D printed in high-temp PETG, designed to withstand outdoor use.
RBL Adapter Add-on is available here.
__________________________________________________________
5x5 Fence Post Kit Includes:
- Fence post cap to replace your existing cap
- Clear dome that twist-locks into place for year-round use
- 9-LED puck light kits, with all wiring
- 10’ extension cables to run to the next post in the fence
How to Install them on your fence post:
Wire can be run through vinyl fence horizontal beams, which are generally hollow in most cases. Our preferred method is to use magnets (readily available at most big box stores) and any kind of pull string and then tie the string to the end of the extension cable. There are several methods you can use to get the wire through your fence. If you choose to run the wire outside / behind your fence, each of our fence caps has a small thin notch that can easily be cut out so the wire can be run externally.
5x5 caps fit posts 5.00" to 5.20"
If post is slightly smaller, you can pad it out easily with weather-striping or a small set screw will work just fine
All fence caps and domes are 3D printed in high-temp PETG, designed to withstand outdoor use.
RBL Adapter Add-on is available here.